E-Cloth 2 Cloth Stainless Steel Pack (Box of 5)
(Was £47.45 saving of : £2.46+vat)
2 Cloth pack – a specialist dual-sided cloth with a scrubbing-stripe side. Ideal for both brushed and polished stainless steel. The second cloth leaves a brilliant streak-free finish.
Cleans using just water, no chemicals. Box of 5.
Removes over 99% of bacteria. 3 Year guarantee
Recommended by Allergy UK. Good Housekeeping Institute approved
The e-cloth Stainless Steel Pack provides the complete solution for cleaning all types of stainless steel, using just water. There are two cloths - a Stainless Steel Cloth and a Glass & Polishing Cloth. The Stainless Steel Cloth easily removes grease, fingermarks and over 99% of bacteria from all types of stainless steel, using just water. It is dual sided - one side features a unique, striped construction made up of small, stiffer fibres. These clean deep into the ‘grain’ of brushed stainless steel, quickly removing grease, dirt and bacteria. The smooth side gives the same high performance cleaning on polished stainless steel surfaces. The Glass & Polishing Cloth also removes light grease, dirt and over 99% of bacteria. Used dry on a damp surface, it gives a perfect, instant, streak-free finish. Brilliant on refrigerators, toasters, kettles, oven hoods and other kitchen appliances. Recommended and approved in UK by Miele, Neff, Franke and SMEG.
Material(s): Stainless Steel Cloth 75% polyester, 15% polyamide 10% Polypropylene, Glass & Polishing Cloth 80% polyester, 20% polyamide
Item Dimensions: Stainless Steel Cloth 32cm x 32cm, Glass & Polishing Cloth 40cm x 50cm
Care of Product
A warm rinse is often enough in day to day use. Machine wash regularly up to 60°C., using a little detergent and rinse well. If too much detergent is used, cleaning performance may be reduced, in which case, hot wash without any detergent. The cloth will benefit from an occasional hot wash at 90°C or sterilising by boiling in just water. • Tumble or hang dry. • DO NOT use bleach, which damages the fibres or fabric conditioner, which inhibits performance. If used by mistake, rewash with a little detergent. Note: Colour may run. Wash new cloths separately.
Wet the Stainless Steel Cloth & wring out
Wipe the striped side along the grain on brushed steel; use the smooth side on polished steel
– Stainless Steel Cloth (with stiffer fibre stripes) – Wet thoroughly and wring out. Clean with the cloth damp, with just water. - Brushed stainless steel - use the striped side and wipe in the direction of the 'grain'. - Polished stainless steel - use the smooth side. – Polishing Cloth (grey) – Use dry. Use directly after the Stainless Steel Cloth while surfaces are still damp. - When the Polishing Cloth gets too damp, it is less effective at drying to a streak free finish. New appliances sometimes have a protective coating to give short-term protection during transit. If this is the case, it may be necessary to repeat the above process a few times, to remove it. TIP: It can be a good idea to fold each cloth and use it as a pad. This ensures good contact with the surface and gives a number of different cleaning sides.